Microline (Clack) S7028 Sediment / Carbon Pre -Filter. Also known as Microline Part No. A1013475. For use in Microline (Clack) Reverse Osmosis (RO) Systems.
These are the genuine Microline OEM filters, manufactured by Clack Corporation. Not an off-brand “compatible”, these genuine filters assure a perfect fit and maximum performance in your Microline or Clack RO system.
The S7028 must be used as a pre-filter….meaning it is installed in the sump housing before the TFC membrane. This filter reduces chlorine taste and odor along with reducing sediment down to 5 microns.
The S7028 is designed to be replaced every 6 months for optimum performance.
Note: Whenever you change the main filters on an RO system, it’s important to sanitize the system, especially the storage tank. The storage tank contains the effluent (treated) water and holds that water until it is drawn to the dispensing faucet through the post filter. Since the RO system removes all of the chlorine or chloramines from the water, the water in the storage tank is not stabilized by a disinfectant and will develop a “bio-film” coating on the inside of the tank. The post-filter will mitigate most of the unpleasant taste from the bio-film, but if left un-sanitized indefinitely, this could pose a problem to the water quality coming from the dispensing faucet. For this reason, we strongly recommend using the Sani-Safe sanitizer each time you change filters. For more information, see the link below or look for Sani-Safe under the “Accessories” section of this site.
You May Also Like...